Success!

Note

Error

Session expiration Your session is going to expireClick here to extend

Budget:

Small project <800

Posted on

11/11/16 10:52 AM

Buyer:

ang***

This project has expired

Why don't you register anyway? We are sure that you will find many similar projects out of the thousands waiting for you!

Post similar project now

Description

Hi, i need to implement a Social Captive Portal (Social login) on router board that mount OpenWRT firmware. I need a custom firmware with our logo and with simple possibility to able the Captive Portal function if it is needed. 

The board is DRAGINO HE - http://www.dragino.com/products/linux-module/item/87-he.html

  • CPU: ATHEROS AR9331 chipset, which integrates MIPS 24Kc processor, CPU 400MHz, Switch (MAC, PHY) and integrates with MAC, RF, PA and LNA for WiFi. 
  • RAM : 64MB;
  • Flash : 16MB
  • Interfaces: 2 x RJ45, 1 x USB Host, 1 x UART, 14 multiplex GPIOs
  • OS: Open Source OpenWrt 
  • Power: 3.3v power input
  • WiFi: Support 150M 2.4Ghz WiFi, 802.11 b/g/n
  • Frequency range: 2.4~2.4835GHz
  • Modulation: BPSK, QPSK, CCK and OFDM (BPSK/QPSK/16-QAM/ 64-QAM)
  • Sensitivity @PER : 135M : -65dBm@10%PER; 65M : -65dBm@10%PER; 54M : -68dBm@10%PER; 11M : -84dBm@8% PER; 6M : -88dBm@10% PER; 1M : -90dBm@8% PER
  • Typical Distance: Indoor: 60m (max); Outdoor 150m (max) (with 2 dBi antenna) 
  • RF Power: 11n: 13dBm; 11g: 13-15dBm, 11b: 16-18dBm,
  • Connector: I-PEX connector. Provide Optional ANT pin out for SMT